Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Jul 7 - Jul 12
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
peg perego car seat height limit Peg Perego Primo Viaggio Convertible Kinetic Car SeatThe Primo Viaggio Convertible is made with the highest quality of materials, providing complete safety and peace of mind to parents of little ones. It offers added safety features like adjustable Side Impact Protection (SIP), Expanded Poly Styrene (EPS) and Expanded Polypropylene (EPP) energy absorbing foam, Anti rebound bar, and Kinetic Pods. Style and Comfort The Primo Viaggio Convertible Kinetic was designed to provide the utmost in safety and
The Primo Viaggio Convertible is made with the highest quality of materials, providing complete safety and peace of mind to parents of little ones. It offers added safety features like adjustable Side Impact Protection (SIP), Expanded Poly Styrene (EPS) and Expanded Polypropylene (EPP) energy-absorbing foam, Anti-rebound bar, and Kinetic Pods.
Style and Comfort
The Primo Viaggio Convertible Kinetic was designed to provide the utmost in safety and fashion. Parents will find the innovative Fresco Jersey performance fabric to comfortably suit their little ones, as well as present a chic and stylish look that would be a welcome addition to any vehicle.
Keep Child Rear Facing Longer
The American Academy of Pediatrics now recommends parents keep their children rear facing until they reach their second birthday, or they reach the maximum height or weight for their seat. The Convertible allows a child to sit rear facing up to 45 lbs., as long as the child's head is at least 1" below the headrest edge. (Please note: Only the lower seven positions can be used in rear-facing mode.)
- Reversible: Can be used rear facing for children 5 to 45 lbs. and forward facing for children 22 to 65 lbs.
- SIP: Side Impact Protection protects child's head, neck, and spine. Easily adjusted to 10 different height positions, even with child in seat. (Please note: Only the lower seven positions can be used in rear-facing mode.)
- Kinetic Pods: Kinetic pods help move forces away from your baby in case of side collision
- EPP + EPS: Energy-absorbing foam, Expanded Polystyrene, in shell. Expanded Polypropylene in the head protects child's body from impact forces.
- ARB: The Anti-rebound bar protects baby by minimizing forces and reducing rotation in case of front or rear collision. The ARB is integrated and stowable.
- ARB Spacer: The Anti-rebound bar spacer allows for extended rear-facing use by increasing your child's leg room by 2 inches / 5cm.
- Energy Management System: Absorbs crash energy with parts designed to bend during a collision, deflecting energy from the child's body. A contoured steel back plate minimizes flexing and reduces forward movement upon impact.
- Quick-Release, 5 point (non-rethread) harness: Made with a "cobblestone" webbing of extra-strong polyester thread; equipped with shoulder pads and chest clip.
- Top Tether Hook: Increases stability in forward facing mode and limits forward movement.
- Easy Tight Latch: Easy tight latch system offers ease of use and installation.
- Tri-Stage Cushion: System is included for comfort and support of a newborn's neck and bottom. As you child grows, cushions can be sequentially removed to keep baby always properly positioned.
- FAA Approved: Certified for use in aircraft
- NHTSA Certified: Certified for use in automobile
- Made in Italy: All PEG baby products are Made in Italy. From concept, to creation, every step in the process is performed by PEG and no one else.
Specifications:
- Seat Dimensions: 26 1/4" x 18 3/4" x 25 3/4"
- Seat Weight: 24.4 lbs.
- Rear-facing child weight: 5 to 45 lbs
- Forward-facing child weight: 26.5 to 65 lbs
- Includes cup holder
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.5 ★★★★★
Based on 1632 reviews
Sort
Product Reviews
★★★★★ 4
Reasonably adequate room divider
Size: 4 Panel-88'', Color: Beige
I'm reviewing this as I assemble it.
Couple things:
1. I didn't expect as much assembly. I've ordered dividers before and they more-or-less came as one unit. Sometimes the panels needed screwing together. These require complete assembly and come largely as three rods: two make up vertical columns and snap together. Another one (called part "C") makes the horizontal columns and you have two of these per panel (one attaches to part "A" and the other part "B"). These parts are metal with a plastic shim. Using the wood screws to attach to part "C" is a real pain in the neck. There's not much holding the panel in place so it's a little tricky.
One tactic I've found while I'm assembling that works for the initial connections from parts A and B to their respective "C" rods is to hold the screw in place with a screw driver and then rotating the rod around the screw. This will do a number on your hands if you aren't wearing gloves. This obviously doesn't work when completing the connection.
Using a driller driver on this is really near impossible because there isn't anything you can use to secure it in place. You can use it on the first panel, but as it gets longer, it becomes increasingly difficult and because it isn't wood, it's really tight. I considered drilling larger pilot holes but since there are only 4x4=16 screws I need to screw in, I just decided to use my screw driver to complete it.
2. Also related to assembly. When completing the panels (attaching parts "A" and "B" to parts "C" that have the cloth cover on it), you have to be careful that when you tighten that side that it isn't loosening the other side. Because the pilot holes are so tight, you can end up rotating the rod, which rotates it in the same direction as looser on the original side. Having someone hold the "C" rod in place while you screw it in is probably the easiest approach. I didn't have a 2nd person, so I just had to keep flipping back and forth and tightening both sides as I screwed it in. Not the worlds biggest deal, but annoying nonetheless.
3. The way the instructions are written, they seem to suggest building this thing progressively; that is, you do panel 1, then 2, connect them together, then do 3 and connect it, etc. I took a different route that I suspect saved me quite a bit of trouble, and I assembled all four panels first and THEN connected everything together.
4. For the love of God make sure you check that the plastic tip is on the same side for every panel. Otherwise, you have to take one side apart again and reverse it. On the bright side, if this happens, you've essentially bored out the pilot holes to be the correct size... which is having me question if I shouldn't have just bored them out to the appropriate width in the first place.
5. Attaching all of the panels together is also an enormous pain in the ass unless you happen to have an 88" long elevated surface. Attaching the legs either requires you to elevate one side, which will invariably twist the inexplicably cheap material in the bottom connectors... or you can attach them sideways... or you can put this thing upright, having two people hold the panels in place while you use the allen wrench to tighten the bolts on the underside. None of those are particularly great options.
NOW on to the utility itself.
1. The panels do let some light through (I didn't believe their advertising, and that was one of the reasons that I bought beige, is that I wanted it to not be too dark). They aren't transparent though, so it isn't that far off from their description. They functionally work great, and keep the mess of wires hidden and when I'm sitting at my desk, actually reflect quite a bit of light into my office. Great!
2. My wife has described these as "the most hideous piece of furniture ever conceived of by man." So it does not have spouse approval factor. Granted, she will seldom be in my office area, so that isn't the end of the world.
3. These are really hard to align in a way that doesn't look a little tacky. There are some plastic connectors but they don't do a bang up job of keeping these in place. Each panel is slightly tilted and it's... quite obvious. I may at some point make my own improvements to these to help make them more level. It's not a particularly expensive product so I wasn't expecting much so it's fine and I'm not going to ding them on the rating because of it.
All said, would I buy this product again? Probably not. It's assembly was ~90 minutes which is about 75 minutes longer than I was anticipating spending on this (not including the 5 minute writeup that I'm doing here). But am I going to return it? Also no, if for no other reason I'd be just as annoyed taking it apart and putting it in the original box to return it.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on October 31, 2023
★★★★★ 5
True to Description
Color: Black, Size: 4 Panel
Love it!! I bought it for privacy while the nurse is dressing my dad. There were several colors black matched the decor . It blocked the sunlight and street lights. Durability and quality very good. Easy closure when not in use. Lightweight. No assembly needed
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 29, 2026
★★★★★ 5
Nice room divider!
Color: White, Size: 8 Panel
The white panels are a nice off-white color. shipped in perfect condition. Already assembled so set up was quick. We use them to separate a photo studio from the main entry. Easily covers a 6 Ft. opening to the room. They are a woven material with wood colored sticks to support the weave. They are about 6 Ft. tall at the top of the curved section but less at the hinged sections. Light and easy to set up and take down. We are straddling two different floors so the extended legs at the bottom make this easy. Not sure how to clean them but they look great so far!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on October 21, 2025
★★★★★ 5
Instant Privacy
Color: Beige, Size: 8 Panel
Bought this to separate a ground level living area used as an office. Works well to cover visual clutter; allows a clean look when entering the front door. Comes fully assembled. Hinges are sturdy enough, as long as the panels aren’t stretched too far; have to allow some bend between them. For the price point, quality and functionality are satisfactory.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on August 22, 2025
★★★★★ 4
Great Divider, Just Needed Anchoring for Outdoor Use
Color: Grey, Size: 6 Panel
This room divider is very nice—stylish, lightweight, and easy to set up. I’m using it outdoors, which may not be its intended use, and I found that wind can knock it over pretty easily. Once I anchored it down, though, it worked just fine and looks great in the space. Indoors, I imagine it would be perfect right out of the box. Overall, a solid purchase with just one small adjustment needed for my setup.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 2, 2025